The Ghost Immobiliser
Immobilisers are a powerful tool to fight vehicle theft. They prevent vehicles from being started without a key fob, and are effective in stopping hotwiring and traditional forms of vehicle theft. However, newer methods like key replication and relay theft are becoming more widespread.
The Ghost Immobiliser was designed to fight these new trends and make your car inaccessible. It doesn't make use of LED indicators or radio signals or key fobs and is quiet and discreet.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects with the CAN data network of your vehicle in order to stop key cloning and theft. It is a TASSA approved product and is recognized by insurance companies. It operates quietly and is virtually unnoticeable to thieves. It makes use of buttons on your steering wheel and center console to generate unique pin-code codes that you have to enter before you can start the car. You can create up to 20 different sequences to increase security. The system is simple to install and does not require any additional wiring or hardware.
It is recommended to use an accredited CAN immobiliser installer that specialises in the specific type of vehicle you have to ensure the most effective results. Ideally, they will have a workshop near you that you can visit to get your installation done. They'll also have a variety of tools and equipment to aid you with the installation process. These include basic hand tools, a multimeter, and insulation tape, as well as heat shrink tubing to protect connections. A user's manual will give you the necessary instructions for the wiring in your vehicle.
Before starting the installation remove the battery from the circuit to avoid short circuits and airbag deployment. It is important to double-check the exact location of the CAN H and CAN L wires as an incorrect identification could result in an inefficient system integration. It is also a good idea to mark the wires with tiny pieces of tape or mark them with labels. Also, make use of a multimeter to confirm that the power source identified provides a consistent 12V supply.
Advanced thieves can employ various methods to evade the Ghost Immobiliser, including blocking and making false signals. These methods are based on amplifying the signal transmitted from your key fob to the electronic control unit of your vehicle. With advanced anti-jamming technologies and a constant monitoring system your vehicle, it can be protected from these sophisticated attacks.
Security Improved
Ghost immobilisers provide an additional layer of protection to your car against theft. It works with an PIN code protection system that is activated by pressing buttons on your dashboard or steering wheel which makes it difficult for thieves to gain access the device and steal your vehicle. The device is designed to be hidden in your vehicle. It does not have LEDs, or other signals to alert potential burglars to its presence. It communicates with your car's ECU on the data bus, which means it is not susceptible to the same hacking and relay attacks that can cripple conventional security systems.
This system is a great investment for those who own luxury cars, since they are at greater chance of theft due to their worth and popularity. Its security features are enhanced to protect against key copying, ECU swapping, and other threats to your car's security. Some ghost immobilisers may be paired with an app, which means that you can easily arm and dearm them. They can also have an option for service/valet that permits you to temporarily disable them while your vehicle is being serviced or repaired.
A ghost immobiliser has another wonderful benefit that is that it doesn't need any cutting of wire. This is a fantastic feature, especially if the vehicle is newer and does not include an immobiliser. Some systems can also integrate with GPS tracking devices, adding an extra layer of security to your vehicle. A GPS tracker may also reduce your insurance rates. If you decide to purchase an immobiliser that is ghost, make sure it's TASSA-certified and an expert installer installs the device for you.
Compatibility with all major brands and models
The Ghost Immobiliser was made to work with all major car models and makes, safeguarding your pride and joy from theft. It uses buttons in your steering wheel, the centre console, or door panels to generate a unique pin code which you must enter before you are able to drive your vehicle. The system is tamper-proof and undetectable. ghost 2 immobiliser cost The Keylab 's also backed by three-year warranty. It is also fully accredited by insurance companies This means that it could help lower your insurance premiums.
Unlike standard immobilisers, which use the key fob of your car to control the ignition, the Ghost system works by connecting directly with the engine controller unit using the CAN data bus. It is nearly impossible to disable, remove or hack. The Ghost system can also be linked to an iPhone app to allow remote monitoring and management.
You can create an PIN that is simple to remember, but mathematically impossible to guess for thieves. The PIN can be personalized and changed at any point, so you can keep your vehicle safe even when you park it on the street or in a public parking lot. You can also choose a valet or service mode in case you require someone else to drive your car for a brief period for instance, when it's in garage for servicing. This feature will also help keep your vehicle from being stolen by a shady mechanic. You can choose an Ghost Call alert to give you more peace of mind. It will notify you when your vehicle is moving or has been moved.
Convenience
The ghost immobiliser is an effective security device that protects your vehicle from common theft methods like key cloning and relay attacks. It works by connecting to the car's CAN data network and blocking communication with the engine ECU. This makes it impossible for thieves to duplicate or hack your vehicle, making the installation of this system a smart idea for any driver.
Once installed, you'll have to enter a PIN of up to 20 digits long using the buttons on the dashboard and steering wheel to begin the vehicle. The system is completely hidden and unnoticeable to thieves because it does not emit any radio frequency signals. It can be set up with an PIN code that can be changed by the user, adding to its security. The system is designed to avoid circuit-cutting, making it almost impossible to hack.
Some systems allow you to communicate directly with the immobiliser via an app on your phone, disarming it immediately in the event that you forget your PIN. Some systems even have a service/valet setting that allows you temporarily to start your car for instance, if you drop it off at a garage or valet park.
The Ghost Immobiliser is also undetectable by thieves, since it doesn't transmit radio signals. This is an important advantage compared to other security products that are available from the aftermarket. It is also easy to use, and doesn't require any complicated wiring. It can be used conjunction with dash cams for added security. Dash cam Thinkware F70 features clear and crisp 1080p HD footage Format Free Technology, and parking mode. The system can also be hardwired to ensure maximum performance and durability.
Installation
If you're looking to secure your vehicle from thieves, it's important to choose the right immobiliser ghost. This device can prevent car thefts by blocking the communication between key fobs as well as the engine controller unit. This device stops thieves from stealing and cloning the signal used to start your vehicle. It also can detect any signs of manipulation and alert the vehicle owner.
The device is easy to install and can be integrated with your vehicle's existing systems. It does not require any modification to the wiring of your vehicle and can be hidden in a hidden area, like under the dashboard. Follow the directions in the manual to ensure that the device is properly installed. After installation, it's important to test the system. This will ensure that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed in your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to remove or bypass the system. Installation generally takes between 2 and 3 hours.
It is recommended that you review the wiring diagram for your vehicle during the installation process. This will help you identify the CAN High and CAN Low wires that are required to connect the Ghost to the engine of your vehicle. It is also important to double-check the connections to ensure that they are secure and properly insulated.
Once the installation is complete, you can use the Ghost Immobiliser in normal operation. It will disable the ignition of your vehicle if you do not start it using the correct PIN, which you will need to enter yourself. The ghost of the immobiliser can be changed to Service/Valet Mode for when you need your vehicle serviced or valet parked.